Would you like to switch to our mobile site? No Yes

CiT Raider Mid Tower Gaming Case - Black

CCL Code: CAS3451
|
Manufacturer Code: CIT-RAIDER RGB
|
Manufacturer: CiT
CiT Raider Mid Tower Gaming Case - Black

Key Features:

  • PSU: Not Included
  • 0 x 5.25" External Drive Bays
  • 2 x 3.5" Internal Drive Bays
  • 2 x 2.5" Drive Support
  • Max MB Size: ATX

Discontinued

Sorry, this product has been discontinued. We have found some similar products below.

The CiT Raider is a Mid Tower professional gaming case with a 4mm tempered glass front panel and a full tempered glass left side panel, allowing you to see the RGB lighting from your included Spectrum fans. The Raider comes in a simple design that's easy to build in, using a popular internal structure. You can fit a total of eight fans but it comes with four 120mm Dual-Ring Halo Spectrum LED fans, three at the front and one at the back.

The Raider case comes with a PCB hub that can fit up to 10 devices; 8 fans and 2 LED strips. An RF controller is included. The RF controller allows you to control the fan lighting, cycling between 6 single colours (Red, Green, Blue, Cyan, Purple and Yellow), and comes with several different lighting modes so you never run out of ideas.

As well has being able to control the lighting, if you choose to have single colour lighting you can control the brightness through the speed buttons on the RF remote, but if you choose the Spectrum lighting effect you can control the fan speed through the speed buttons on the RF remote.

A 4-pin Molex connector and a 3-pin ASUS connector come with the RGB hub meaning you can control your LED light through your motherboard or other supported devices as well as the RF controller, giving you more control!

You can enhance your cooling further with room at the front for a radiator up to a 360mm, at the top a radiator up to 280mm and at the back a radiator up to 120mm. This gaming case has good compatibility, supporting ATX, Micro ATX, Mini ITX motherboards and ATX power supplies up to 240mm in length to give you unlimited options. On the top of the case for easy access is 1 x USB3.0, 2 x USB2.0 and HD audio allowing you to connect to a variety of devices.

Clearances

  • Max GPU Length: 350mm
  • Max CPU Cooler Height: 160mm
  • Max PSU Depth: 240mm

Main Features

  • Stylish Exterior - 4mm thick tempered glass front panel and a full tempered glass left side panel not only gives the Raider a professional look but allows you to show off the lighting coming from your Spectrum fans.
  • Fans - Supports up to eight fans with four Dual-Ring Halo Spectrum fans included to give your case some added colour in your finished build.
  • Water-Cooling Support - As well as supporting eight fans the Raider supports a radiator up to 360mm at the front, at the top a radiator up to 280mm and at the back a 120mm radiator to give you extensive cooling support.
  • PCB Hub - A PCB hub is included and can fit up to 10 devices, 8 fans and 2 LED strips. The PCB hub comes with a 4pin Molex for easy connectivity and a 3pin ASUS connector is also included connecting to your motherboard so you have the choice of how you want to control your LED's.
  • RF Controller - The RF remote controller included gives you the option of six single colours and several different lighting modes so you can stand out from the crowd. With the remote controller being RF it makes it easier and more efficient when you come to change your LED lighting..
  • I\O Ports - Easy accessible 1 x USB2.0, 2 x USB 3.0 ports on the top with transfer speeds of 5Gbps means you can connect to a range of media devices.
  • Removable Dust Filters - A dust filter on the top and bottom of the Raider helps to prevent dust from getting into your build and helps improve the performance of your chassis.

Storage

Internal Expansion Bays 2 x 2.5"
2 x 3.5"

Expansion

Expansion Slots 7 x Full Height

Interfaces/Ports

USB Ports 1 x USB 3.0
2 x USB 2.0
Headphone Ports 1 x 3.5mm Jack
Microphone In Port 1 x 3.5mm Jack

Electrical

Cooling System Front: Supports 3 x 120mm or 2 x 140mm fans (3 x 120mm RGB LED fans included)
Top: Supports 2 x 120mm or 140mm fans
Rear: Supports 1 x 120mm fan (RGB LED fan included)
Power Supply ATX Power Supply supported

Physical

Form Factor Mid Tower Case
Case Colour Black
Material 0.5mm SPCC
4mm Tempered Glass
Motherboard Compatibility ATX
MicroATX
Mini-ITX
In The Box Case
Accessories
Width 198 mm
Depth 411 mm
Height 451 mm
Weight 6 kg

Key Features

L.E.D Fan RGB
Internal 3.5" Bay 2
Internal 2.5" Bay 2
ATX Yes
Cooler Height 160 mm
Side Panel Type Tempered Glass
GPU Length 350 mm
PSU Depth 240 mm
Maximum Motherboard Size Supported ATX
Case Type Tower
USB 3.0 Support Yes
Case Form Factor Mid Tower
Main Colour Black
Optimised for Gaming

Item Details

Manufacturer CiT
Manufacturer Code CIT-RAIDER RGB
EAN 5055492407313
Condition New

Do you have you a question about the CiT Raider ATX Mid Tower Gaming Case (Black) with 4 x Halo Spectrum RGB Fans, Aura Sync Support?

Q: Will I need to remove the top 2 front fans as I need to front mount the radiator, or can I use a pull push with the rgb fans and cooler fans
Answer by Website User on 21st November 2018
Can you remove the front fans and you would not be able to setup a push pull config as there would not be enough space on the front mesh.
0 customers found this answer helpful.
Answer by Website User on 21st November 2018
How come its says "Water-Cooling Support - As well as supporting eight fans the Raider supports a radiator up to 360mm at the front, at the top a radiator up to 280mm and at the back a 120mm radiator to give you extensive cooling support."
1 customer found this answer helpful.
Answer by Website User on 27th November 2018
manages to get the answer i needed from this guy - https://www.amazon.co.uk/CiT-Raider-Gaming-Case-Mid-Tower/dp/B07G4GRTQ4
0 customers found this answer helpful.
Post Answer
Q: Does this case come with fans (and are they RGB) or do I need to buy them separately? Thanks.
Answer by Website User on 23rd October 2018
it will come with RGB fans
0 customers found this answer helpful.
Post Answer
Q: Is there a manual for this case? I've just received mine and am a bit lost...!
Answer by Website User on 30th August 2018
Unfortunately, our spec sheets do not include an in the box itinerary so we are unable to advise.
0 customers found this answer helpful.
Post Answer