Introducing the Time Bandit, unique design and exceptional functionality, these are the characteristics that GameMax have chosen to define the Time Bandit. The Time Bandit has a striking front panel with an ARGB infinity mirror effect panel results in an aesthetically appealing chassis.
This front panel design adds a stylish flair to your gaming case and it does not stop there with eye-catching angular aesthetics help the Time Bandit to reach it’s full potential. Three pre-installed 120mm fans mounted on the top and rear of the chassis which is also equipped with sleek infinity effects illuminates the spacious interior of this exquisite Mid-Tower. On top of the three pre-installed fans there is room for another five to fully populate and three water cooling locations with a 360mm radiator the largest that can be installed this case is full of cooling capability.
Stand out with the touch of Infinity, the circular-shaped infinity mirrors at the centre of the fans create a mesmerising LED lighting display with their multi-layer effect. They not only look fantastic but also ensure all components are taken care of for when it comes to keeping temperatures balanced & conditions optimised for a peak performance.
Your hardware is on show thanks to the tempered glass side panel it leaves little hidden, moving onto the top of the case the I/O panel provides USB3.0 and USB2.0 connections & inside is a PWM ARGB hub with LED lighting controls with access to approximately 40 LED modes or 16.8 million colours using a compatible addressable RGB MB.
Measuring 46.2cm in height, the all-black interior & full PSU shroud add to the smooth and unobtrusive look. It can fit a graphics card up to 34cm & behind the MB & PSU shroud up to 3 x 2.5” / 2 x 3.5” drives. Removable dust filters help keep your rig clean, with room in the shroud for an ATX PSU up to 170mm with cables easily hidden.
Overall the GameMax Time Bandit distinguish itself with its state of the art yet functional design.
Main Features
- Attractive Design - The Time Bandit's front panel possesses a beautiful infinity mirror effect and ARGB lighting, the infinity mirror effect set on the front panel through the tempered glass provides users with a luminous visual experience.
- Stylish Cooling - Stand out with the three PWM fans included, mounted on the top and rear of the Time Bandit. The ARGB infinity mirror plus cooling fans can be controlled via connection to your Motherboards 3-Pin 5VDG or via the I/O Panel. The Time Bandit uses the best infinity fans, these are three-sided infinity ARGB fans, the touch of infinity, the circular-shaped infinity mirror at the centre of the fan is created to have multiple layers spaced approximately 0.5mm apart. The multi-layer effect creates a mesmerising LED lighting display.
- Extra Infinity - Surrounding infinity trims are located on both sides of the frame. The geometric shape of the infinity mirror follows the inner-ring and outer-ring ARGB lighting that creates a 3D indented look.
- Side Frame ARGB - The ultimate ARGB fan with an inner and outer ring has two embedded LED lights on both sides of the fan blade.
- Fan Controller Included - A PWM hub is included inside the Time Bandit which allows you to add up to 6 case fans and is powered directly from your power supply via SATA. You can access it using the LED button and it's connected to the Motherboard using a single cable - you can setup without any additional cables.
- PWM Fan Control - The hub can be connected to the CPU fan interface on your chosen Motherboard to access temperature readings. An increased CPU temperature increases the fan speed automatically and swiftly cools the system down. Conversely when the CPU temperature decreases the fan automatically slows reducing the overall noise.
- Motherboard Software - The ARGB lighting effects can be synced through the Motherboard which supports ARGB function, 5V 3-Pin Addressable RGB header, including ASUS AURA, MSI Mystic Light, Gigabyte Fusion 2.0 & ASRock. Customise the look with endless possibilities with 16.7 million static modes and 12 pre-set lighting effects.
- VDG Connector Included - A 3pin VDG connector is included which is intended for use with older Gigabyte and Aorus Motherboards.
- Tempered Glass Panel - The tempered glass side panel offers an unobstructed view of the interior and shows off your system build. It allows users to enjoy a panoramic view of the lightning.
- Hardware Orientated - The interior comes entirely in black and with a full-length PSU shroud that only adds to the stylish and unobstructive look. A dedicated PSU Shroud that is made with solid steel panelling that perfectly covers the cables, showcases the PSU specs and contains a hard drive mount. Behind the shroud is where users will find space for one 3.5" HDD in the HDD cage provided and two 2.5" SSDs can be installed next to the Motherboard. Located on the top of the HDD cage there is space for one 3.5" HDD or one 2.5" SSD. The Motherboard tray and PSU shroud both offer a number of openings for optimum cable management with up to 27mm cable management space. Underneath the case is a removable dust filter suitable for a full sized ATX PSU up to 170mm long.
- ATX Housing - Standing at 462mm high, 210mm wide and 381mm deep the Time Bandit is compatible with a wide range of components, with 340mm of clearance for GPUs and it can facilitate CPU coolers up to 165mm tall. Additionally the I/O panel located at the front possesses one USB3.0 & two USB2.0 ports, HD-Audio, Mic & LED / Reset button. There are seven expansion slots on the rear panel for PCIe devices.
