The Meshify 2 RGB is a high-performance case with a bold, stealth-inspired aesthetic. Its striking exterior features bolt-free, flush tempered glass, a fully removable top granting excellent interior access, and a front with USB-C, hinged mesh panel and removable nylon filter. The flexible dual-layout interior supports large storage arrays and multi-radiator setups that makes cooling a breeze.
Light and Colour
Comes with 4x Aspect 14 RGB PWM fans pre-installed.
Meshify 2’s roomy internal layout easily accommodates E-ATX motherboards up to 285 mm wide.
Transformable interior design utilizing a movable wall for enhancing custom builds.
Smooth and Sturdy
The Meshify 2 is remarkably robust and comes with an angular asymmetrical style front mesh.
Flexible Dual-Layout Design
There’s more than enough space for your custom water loop with large reservoirs and radiators up to 360 mm in the default Open Layout.
Detachable Front Filter
The front nylon filter can easily be removed from the hinged mesh panel for increased airflow.
Convert to Storage Layout and install up to 11 HDDs alongside four dedicated SSDs mounts. (6x SSD/HDD trays, 2x SSD brackets and 1x Multibracket included)
Open and Interchangeable
Remove the entire top to build and route with zero hindrance. Swap in the ventilated panel to add three filtered fan positions.
Four Aspect 14 RGB PWM fans come preinstalled with room to expand up to a total of nine fans.
Easier Front Access
I/O connections are separated from the redesigned front panel to simplify installation and modding.
The included Multibracket lets you convert any unused fan position to an HDD, SSD or pump mount.
- Comes with 4x Aspect 14 RGB PWM fans pre-installed
- Repositioned front fan mounting sets a wider stage for light and color
- Built in RGB controller on the front/top I/O with iconic Fractal Northern Lights effect
- Iconic angular mesh design provides filtered airflow with a bold, stealth-inspired aesthetic
- Spacious and extensively adaptable dual-layout interior easily accommodates large motherboards up to and including 285 mm E-ATX
- Support for radiators up to 360 mm in front, 360 mm up top, or 280 mm in the base in the default Open Layout
- Includes 6 HDD/SSD trays, 2 SSD brackets, and 1 universal Multibracket for mounting up to 9 drives
- Expandable to 11 trays and 4 SSD brackets with 3 Multibrackets installed in the top and bottom for a max of up to 18 drives in Storage Layout
- Chassis opens up to fully expose the case interior on three sides for totally unhindered installation and cable routing
- Front nylon filter that can be removed for increased airflow
- Front panel with hinged removable mesh and tether-free bezel for easier access to front fan mounts
- Three front USB ports including one USB 3.1 Gen 2 Type-C with fast charging support and speeds up to 10Gbps
- Ultra-slim Nexus+ 2 fan hub connects up to three PWM fans and six 3-pin fans directly in line with cable channels along the edge of the case
- Outstanding cooling capacity with a total of nine 120/140 mm fan mounts and four preinstalled Aspect 14 RGB PWM fans
- Detachable PSU cable shield and integrated cable guides with cable ties further simplify cable management behind the board
- Versatile Multibracket that converts any unused fan position to an HDD, SSD or pump mount
- Bridgeless expansion slots ensure obstruction-free connections and allow for a more centered vertical GPU installation via the new Flex B-20 PCIe riser (sold separately)
- Two vertical GPU slots for use with the Flex VRC-25 PCIe riser, available separately
- Easy-to-clean high airflow nylon filters on the front, top and base with full PSU coverage and convenient front access
- Ventilated PSU shroud with two-part removable cover for optimal cable concealment and front radiator support
- Tool-less, top-latching side panels allow quick access while preventing accidental drops