TP-Link Archer NX200 V1 5G AX1800 Wireless Dual-Band Gigabit Router
Available for delivery from Tuesday 16th June
Click & Collect from Tuesday 16th June
Order within
You have 0 of these in your basket
Stay connected at next-generation speeds with the Archer NX200, a powerful 5G Wi-Fi 6 router designed for both home and office use. With blazing-fast 5G mobile broadband (up to 4.67 Gbps) and dual-band Wi-Fi 6 (AX1800), this router delivers smoother streaming, faster downloads, and lower latency for gaming and video calls.
Insert a nano-SIM card to instantly share 5G/4G internet across your network, or use the gigabit WAN port for fixed broadband connections. Equipped with advanced Wi-Fi 6 technology, the Archer NX200 supports OFDMA, MU-MIMO, and 1024-QAM to efficiently handle multiple devices at once, ensuring reliable performance for the whole household.
For extended coverage, the router works with TP-Link EasyMesh devices to eliminate dead zones and provide seamless whole-home Wi-Fi. With robust WPA3 security, gigabit LAN ports, and external antenna support, it’s built for flexibility, performance, and peace of mind.
Router
- Router Type: 5G AX1800 Wireless Dual-Band Gigabit Router
WAN
- WAN Protocols: Dynamic IP, Static IP, PPPoE, PPTP (Dual Access), L2TP (Dual Access)
- WAN Signalling: IP over Ethernet, PPP
- WAN Standards: 5G NR, 4G LTE (FDD/TDD), 3G UMTS/HSPA+
Wireless LAN
- Antenna Type: 8 x internal 5G/LTE antennas, 2 x internal Wi-Fi antennas, 2 x external SMA-F connectors
- Range (Outdoor - Maximum): Dependent on 5G/4G network; Wi-Fi range typical for dual-band AX1800 (up to ~100m outdoors, ~30m indoors)
- Transmit Power: <23 dBm (5.15-5.35 GHz), <30 dBm (5.47-5.71 GHz), <20 dBm (2.4 GHz)
- Data Transfer Rates: 5 GHz: 1201 Mbps, 2.4 GHz: 574 Mbps, 5G download: up to 4.67 Gbps
- Encryption: 64/128-bit WEP, WPA, WPA2, WPA3, WPA-PSK/WPA2-PSK
- Frequency Band: 2.4 GHz & 5 GHz Wi-Fi; 5G NR bands N1/N3/N5/N7/N8/N20/N28/N38/N40/N41/N77/N78; LTE bands B1/B3/B5/B7/B8/B20/B28/B32/B38/B40/B41/B42/B43
- Number of channels: 2.4 GHz: 1-13 (region-specific), 5 GHz: 36-165 (region-specific)
- Operating Frequency: 2.4 GHz, 5 GHz Wi-Fi; 700 MHz-3700 MHz (5G/LTE bands)
- Spreading: OFDMA, MU-MIMO (Wi-Fi 6), DSSS/OFDM (legacy)
- Modulation Technique: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM
- IEEE 802.11: Supported
- a: Yes (5 GHz)
- b: Yes (2.4 GHz)
- g: Yes (2.4 GHz)
- h: Yes (DFS compliance in 5 GHz)
- n: Yes (2.4 GHz & 5 GHz)
- u: Yes (network discovery, roaming support)
- ac: Yes (5 GHz)
- ax: Yes (Wi-Fi 6, 2.4 GHz & 5 GHz)
Telecommunications
- Impedance: 50 O (standard RF antenna interface, SMA-F connectors)
- Active Inbound Call Switching for POTS: Not Supported
- Lifeline Support: Not Supported
- DTMF Dialling: Not Supported
- Internal Ring: Not Supported
- Loop Start Signaling: Not Supported
- DTMF Detect and Remove: Not Supported
- G.711 Compression: Not Supported
- G.726 Compression: Not Supported
- G.729ab Compression: Not Supported
- G.168 Echo Cancellation: Not Supported
- A-law, U-law Encoding: Not Supported
- Fax/Data Detect and Support: Not Supported
- Universal CP Tone Detect: Not Supported
- Voice Activity Detect: Not Supported
- Signaling: Not Supported
- Silence Reconstruction: Not Supported
- Packet Loss Compensation: Not Supported (no VoIP features)
- Caller ID Transmit/Receive: Not Supported
- Caller ID on Call Waiting: Not Supported
- Flash on/off Hook: Not Supported
- 3 Way Call: Not Supported
- Silence Suppression: Not Supported
- Software Standards: IPv4, IPv6, TCP/IP, DHCP, NAT, VPN (PPTP, L2TP, IPSec, OpenVPN), QoS, UPnP, EasyMesh
- DTMF: Not Supported
Performance
- Throughput: Wi-Fi: 574 Mbps (2.4 GHz), 1201 Mbps (5 GHz); 5G: up to 4.67 Gbps (DL)
- IP Packet Routing: Supported (Static/Dynamic IP, NAT, DHCP, IPv4/IPv6 routing)
- Packet Forwarding Rate: Up to 1 Gbps (limited by Gigabit LAN ports)
- Topology: Star / Mesh (EasyMesh-supported)
- MTBF: > 50,000 hours (typical for consumer networking equipment, TP-Link doesn't specify exact)
Security
- VPN Pass Through/Multi-Sessions: Supported: PPTP, L2TP, IPSec, OpenVPN
- User Authentication: Password login, TP-Link ID (Cloud), WPA/WPA2/WPA3 for Wi-Fi
- Security: WPA/WPA2/WPA3 encryption, SPI firewall, DoS protection, Access Control, IP/MAC binding, Guest Network
- Firewall Filtering: Stateful Packet Inspection (SPI), DoS protection, IP & MAC binding, Access Control
- VPN: PPTP, L2TP, IPSec, OpenVPN
- VPN Client Sessions: Multiple (exact max not published by TP-Link, supports concurrent VPN connections)
- Site to Site VPN Policies: Supported via IPSec/OpenVPN
Ethernet
- Protocols Supported: IPv4, IPv6, TCP/IP, DHCP, NAT, PPTP, L2TP, IPSec, OpenVPN, UPnP
- Ethernet Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
- Flow Control: IEEE 802.3x (Full Duplex)
Interfaces/Ports
- 10/100-BaseT Port Capacity: 0 (all ports are Gigabit)
- 10/100-Base-TX Port Capacity: 0 (all ports are Gigabit)
- ADSL Interface: Not Supported
- Serial Ports: None
- Console Port: None
- ATM25 Interface: Not Supported
- WAN Ports: 1 10/100/1000 Mbps LAN/WAN (RJ45), plus Nano-SIM slot for 5G/4G
- Number of WAN Ports: 1 (Ethernet), 1 (Nano-SIM for mobile WAN)
- WAN Port Connector: RJ45 (Ethernet) + Nano-SIM slot (for 5G/4G WAN)
- WAN Port Speed: 10/100/1000 Mbps (Gigabit)
- WAN Port Protocol: IPv4, IPv6, PPPoE, Dynamic IP, Static IP, PPTP, L2TP
- LAN Ports: 2 x 10/100/1000 Mbps RJ45
- Number of LAN Ports: 2
- LAN Port Connector: RJ45
- LAN Port Speed: 10/100/1000 Mbps (Gigabit)
- LAN Port Protocol: Ethernet (IEEE 802.3, 802.3u, 802.3ab)
- Parallel Ports: None
- USB Ports: None
- Full Duplex Capabilities: Yes (IEEE 802.3x flow control, full/half duplex)
- VoIP Ports: None
- Telephone Ports: None
- Auxiliary Ports: 2 SMA-F external antenna connectors (for 5G/LTE)
- Modem Port: Nano-SIM slot (for built-in 5G/4G modem)
- Serial ATA Ports: None
- WAN Autosensing: Yes (auto-detects WAN type on RJ45 Gigabit WAN port)
- LAN Autosensing: Yes (auto-negotiation 10/100/1000 Mbps on LAN ports)
- LAN Ports: 2 x Gigabit RJ45
Memory
- Memory Maximum: Not Expandable
Environmental
- Noise Level (full operating mode): Fanless, 0 dB (silent operation)
Memory
- Memory Type: DDR3 (assumed, not published)
Physical
- Form Factor: Desktop Tower (190 mm tall)
Memory
- Flash Memory: Same as above - Not Published
- Memory Slot: None (integrated, not upgradeable)
Storage
- Internal Storage: None
- Number of Storage Units: 0
- Storage Unit Capacity: None
Expansion
- Number of Slots: 0
- Expansion Slots: None
- Wan Interface Cards: Not Supported (integrated only)
Compliance
- Safety: CE, RoHS
- EMI: CE EMC compliance, EN55032/EN55024 (region-dependent)
- Immunity: CE standards (EN61000 series)
- Standards: IEEE 802.11ax/ac/n/g/b/a, IEEE 802.3/3u/3ab
System
- Management: TP-Link Tether App, Web UI (HTTP/HTTPS), TP-Link Cloud, Remote Management
- Administration: Web interface, App, Remote login, Cloud account
- Resiliency/Redundancy: WAN failover: mobile (5G/4G) ? wired (Ethernet)
- Convergence/Prioritising: QoS, Bandwidth Control, Device/Application prioritisation
- Operating System: Proprietary TP-Link Router OS (embedded)
- Clients: Supports up to ~64+ simultaneous devices (typical Wi-Fi 6 capacity, depends on environment)
- Router Modes: 5G/4G Router, Wireless Router, Access Point
System Requirements
- System Requirements: Windows 98SE/NT/2000/XP/Vista/7/8/8.1/10/11, macOS, Linux, UNIX; Browser: IE 11+, Firefox 12+, Chrome 20+, Safari 4+
- Browser Support: IE 11+, Firefox 12+, Chrome 20+, Safari 4+, any modern Java-enabled browser
- Operating Systems Supported: Windows, macOS, Linux, UNIX (for client devices)
Electrical
- DC Input Voltage: 12 VDC
- Power Adaptor Type: External AC to DC adapter
- Power Adaptor Output: 12 VDC / 2 A
- AC Input Current: 0.6 A
- AC Input Voltage: 100-240 V ~ 50/60 Hz
- Electrical Frequency: 50/60 Hz
- Maximum Power Consumption: ~24 W (12 V 2 A)
- Redundant Power Supplies: None
- Power over Ethernet (PoE): Not Supported
- DC Input Voltage: 12 VDC
- Power over Ethernet (PoE) Standards: Not Supported
- Power Cord: Included with external power adapter
- Battery: None
Environmental
- Operating Humidity: 10%-90% non-condensing
- Operating Temperature: 0 øC ~ 40 øC (32 øF ~ 104 øF)
- Noise Level (full operating mode): 0 dB (fanless, silent)
- Heat Dissipation: Passive (no fan, vented chassis)
Physical
- Form Factor: Desktop Tower (99 x 99 x 190 mm)
- Case Colour: White
- LED Status Indicators: Power, Internet, LAN, Wi-Fi, Signal Strength
- Rack Units: Not Rack-Mountable
- In The Box: Archer NX200 Router, Power Adapter (12 V/2 A), RJ45 Ethernet Cable, Quick Installation Guide
- Width: 99 mm (3.9 in)
- Depth: 99 mm (3.9 in)
- Height: 190 mm (7.5 in)
- Weight: ~0.6 kg (net weight, device only)
- Notes: Dimensions and weight exclude packaging; shipping weight ~0.98-1.2 kg depending on region
Shipping
- Shipping Pallet Quantity: Not Published (varies by distributor)
- Pallet Product Quantity: Not Published
- Shipping Carton Quantity: 1 unit per carton (retail box)
- Shipping Carton Product Quantity: 1
- SC Width: 250 mm
- SC Depth: 150 mm
- SC Height: 120 mm
- SC Weight: 0.98-1.2 kg (gross shipping weight)
- Trade Carton: 1 unit per trade carton
- Trade Carton Product Quantity: 1
- TC Width: 250 mm
- TC Depth: 150 mm
- TC Height: 120 mm
- TC Weight: 0.98-1.2 kg
Wireless LAN
- IEEE 802.11a: Supported
- IEEE 802.11b: Supported
- IEEE 802.11e: Supported (QoS/WMM)
- IEEE 802.11g: Supported
- IEEE 802.11h: Supported (DFS/TPC in 5 GHz band)
- IEEE 802.11n: Supported (2.4 GHz & 5 GHz)
- Range (Indoor - Maximum): ~30 m indoors (environment dependent)
- Templ: Operating: 0 øC ~ 40 øC; Storage: -40 øC ~ 70 øC
- Receive Sensitivity: 2.4 GHz: up to -78 dBm; 5 GHz: up to -80 dBm (varies by modulation, see datasheet)
Attributes
- PCMCIA Slots: None
Identifiers
- Stock Code: NET4805
- Mfg Code: Archer NX200