COVID-19 INFORMATION: Our showroom is open for Click & Collect orders. Click here for details.

CS1002 Gaming Case - Black

CCL Code: CAS3754
Manufacturer Code: CS1002
Manufacturer: Generic
CS1002 Gaming Case - Black

Key Features:

  • PSU not included
  • 2 x 2.5", 2 x 3.5" HDD Bay(s)
  • Max MB Size: ATX


Sorry, this product has been discontinued. We have found some similar products below.

The CS1002 is an ATX PC gaming case with a difference, the front panel comes with an ARGB LED strip that has several colour modes to choose from. Connect your 3pin AURA to a compatible motherboard and your choice of LED combinations are endless. Control using your motherboard or the reset button located on the top of the I\O port.

Getting the correct balance of air running through your system is no problem with room to mount four fans in total and mesh cut outs running down the right-hand side enables your build to always run at it’s peak.

Want a clean looking system with the 1002 you now can with five cut outs in total and a full-length PSU shroud are perfect for building a great looking chassis.

The I\O ports are easily located on the top of the chassis for easy access and allowing connection to a variety of different devices. 

Main Features

  • Design - The 1002 is an ATX gaming case with a unique design it comes with an ARGB LED strip, mesh cut outs on the right-hand side to provide good airflow, and a full acrylic side panel.
  • ARGB LED Strip - The ARGB strip comes with a 3pin AURA connector and once connected to a compatible motherboard you can control your LEDs through your motherboard software or the LED button. Your choices are endless.
  • LED Button - Using the reset button gives the user easier access when changing the colour of your Rainbow LED strip.
  • Cooling - The 1002 has room to mount four fans in total and you can fit up to a 240mm radiator at the front and a 120mm radiator at the back of the chassis, enhance your cooling options further.
  • Acrylic Side Panel - The left side comes with a full acrylic side panel to showcase your internal components.


Internal Expansion Bays 2 x 2.5"
2 x 3.5"


Expansion Slots 7 x Full Height


USB Ports 1 x USB 3.0
2 x USB 2.0
Headphone Ports 1 x 3.5mm Jack
Microphone In Port 1 x 3.5mm Jack


Cooling System Front: Supports 3 x 120mm fans
Rear: Supports 1 x 120mm fan
Power Supply ATX Power Supply supported


Form Factor Mid Tower Case
Case Colour Black
Material 0.5mm SPCC
Motherboard Compatibility ATX
In The Box Case
Accessory Pack
Width 180 ,,
Depth 416 ,,
Height 421 ,,
Weight 3.7 kg


Warranty 1 Year

Key Features

Firewire No
Main Colour Black
Case Type Tower
USB 3.0 Support Yes
Case Form Factor Mid Tower
Power Supply Included No
Optimised for Gaming
80Plus Rated No
PSU Form Factor ATX
Display Model in Showroom No
L.E.D Fan No LED
Internal 3.5" Bay 2
Internal 2.5" Bay 2
Micro-ATX Yes
Cooler Height 145 mm
Built-in Card Reader No
USB Type-C Support No
Front HDMI No
Side Panel Type Windowed
GPU Length 370 mm
Front Audio Type Separate
Maximum Motherboard Size Supported ATX

Item Details

Manufacturer Generic
Manufacturer Code CS1002
EAN 5055492408082
Condition New

Warranty Information

Warranty 1 Year

Manufacturer Information

Manufacturer Generic
Manufacturer Code CS1002

Do you have you a question about the Generic CS1002 Mid Tower ATX Case with ARGB Spectum LED, Acrylic Window?

Q: will i be able to fit a hyper 212 evo into this
Answer by Website User on 29th June 2020
No, that cooler would be too large. -MR
0 customers found this answer helpful.
Post Answer
Q: How do you screw fans into it?
Answer by Matt on 21st May 2020
You mean front fans? The front is removeable. -MR
0 customers found this answer helpful.
Answer by Website User on 21st May 2020
Is it a slide-off kind of front? I've tried sliding it and, unless it's jammed, it won't come off.
0 customers found this answer helpful.
Post Answer
5 / 5 1 review


4 months ago

Real good case for modding or as is thx CCL Computers Team