Kingston ValueRAM 2GB (1x2GB) DDR3 1333MHz Non-ECC CL9 DIMM 240-Pin Unbuffered SR x16 1.5V *Open Box*

CCL Code: RAM1915X
|
Manufacturer: Kingston
Kingston ValueRAM 2GB (1x2GB) DDR3 1333MHz Non-ECC CL9 DIMM 240-Pin Unbuffered SR x16 1.5V *Open Box*

Open Box Item - 1 Year Warranty

Key Features:

  • VDDQ = 1.5V (1.425V ~ 1.575V)
  • 667MHz fCK for 1333Mb/sec/pin
  • 8 independent internal bank
  • 8-bit pre-fetch
  • On Die Termination using ODT pin
  • Asynchronous Reset

Discontinued

Sorry, this product has been discontinued. We have found some similar products below.

Open Box Clearance Item

Please note that this is an open box clearance item. It may have been repaired by the manufacturer, or returned to us by another customer who purchased it in error. The price has been reduced to reflect this.

Clearance items should be as new and of course should be a real bargain. All clearance items are working and have been fully tested. Although every effort has been made to ensure that open box items are supplied with their original accessories, some packages may not be 100% complete. But we are confident you will receive the essentials.

This item is supplied with a 12 month warranty.

This document describes ValueRAM's 256M x 64-bit (2GB) DDR3-1333 CL9 SDRAM (Synchronous DRAM) 1Rx16, memory module, based on four 256M x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. This 240-pin DIMM uses gold contact fingers.

Please note that this is an open box clearance item. It may have been repaired by the manufacturer, or returned to us by another customer who purchased it in error. The price has been reduced to reflect this.

Clearance items should be as new and of course should be a real bargain. All clearance items are working and have been fully tested. Although every effort has been made to ensure that open box items are supplied with their original accessories, some packages may not be 100% complete. But we are confident you will receive the essentials.

This item is supplied with a 12 month warranty.

Main Features

  • JEDEC standard 1.5V (1.425V ~ 1.575V) Power Supply
  • VDDQ = 1.5V (1.425V ~ 1.575V)
  • 667MHz fCK for 1333Mb/sec/pin
  • 8 independent internal bank
  • Programmable CAS Latency: 9, 8, 7, 6
  • Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
  • 8-bit pre-fetch
  • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
  • Bi-directional Differential Data Strobe
  • Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
  • On Die Termination using ODT pin
  • Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°
  • Asynchronous Reset
  • PCB : Height 1.180 inch (30.00mm), single sided component

Memory

Memory Speed 1333MHz MHz
Designation PC3-10600
Pin Configuration 240 pins
CAS Latency CL9
Memory Type DDR3
Memory Size 2048 MB
Number of Modules 1 module(s)
Module Size 2048 MB
Memory Package DIMM
Bus I/O Configuration Unbuffered
Error Correction Non ECC

Electrical

Voltage 1.5 V

Environmental

Operating Temperature 0 to 85 °C
Non Operating Temperature -55 to +100 °C

Physical

Form Factor Memory Module
Case Colour Green

Key Features

Memory Modules Kit Size 1
Memory Standard PC3-10600
Memory CAS 9
Memory Voltage 1.5 V
Memory ECC No
Memory Buffered No
XMP Support No
Individual Module Size 2048 MB

Item Details

Manufacturer Kingston
EAN 0740617228250
UPC 740617228250
Condition Open Box

Do you have you a question about the Kingston ValueRAM 2GB (1x2GB) DDR3 1333MHz Non-ECC CL9 DIMM 240-Pin Unbuffered SR x16 1.5V *Open Box*?

PDF Datasheets and Manuals

Document File type File size
Datasheet pdf 0.14MB