Intel ET PCI Express Gigabit Ethernet Adapter

CCL Code: NET1764
|
Manufacturer Code: E1G42ET
|
Manufacturer: Intel
Intel ET PCI Express Gigabit Ethernet Adapter

Key Features:

  • PCI Express Interface
  • 2 Network Ports
  • Speed: 10/100/1000Mbps

Discontinued

Sorry, this product has been discontinued. We have found some similar products below.

The Intel Gigabit ET and EF Multi-Port Server Adapters are Intel’s third generation of PCIe GbE network adapters. Built with the Intel 82576 Gigabit Ethernet Controller, these adapters showcase the next evolution in GbE networking features for the enterprise network and data centre. These features include support for multi-core processors and optimization for server virtualization.

Main Features

  • Intel 82576 Gigabit Ethernet Controller: Industry-leading, energy-efficient design for next-generation Gigabit performance and multi-core processors
  • Low-profile: Enables higher bandwidth and throughput from standard and low-profile PCI Express slots and servers
  • iSCSI remote boot support: Provides centralized storage area network (SAN) management at a lower cost than competing iSCSI solutions
  • Load balancing on multiple CPUs: Increases performance on multi-processor systems by efficiently balancing network loads across CPU cores when used with Receive-Side Scaling from Microsoft or Scalable I/O on Linux
  • Compatible with x4, x8, and x16 standard and low-profile PCI Express slots: Allows each port to operate without interfering with the other
  • Multi-port design: Enables dual- or quad-port operation in almost any PCI Express server slot, except x1 slots
  • Support for most network operating systems (NOS): Enables widespread deployment
  • RoHS-compliant: Compliant with the European Union directive 2002/95/EC to reduce the use of hazardous materials
  • Intel PROSet Utility for Microsoft Windows Device Manager: Provides point-and-click management of individual adapters, advanced adapter features, connection teaming, and virtual local area network (VLAN) configuration

Network

Network Speeds Supported 10/100/1000 Mbps
Data Link Protocol Ethernet

Interfaces/Ports

Number of Ports 2 port(s)
Port Connector RJ-45
Network Card Bus PCI Express 2.0 (2.5 GT/s)
Cabling Type Category-5, unshielded twisted pair (UTP) (ET Adapters) • Shielded Cable is required for EMI compliance

System Requirements

Network Operating Systems Supported Microsoft Windows Vista (SP1), Windows Server 2003 (SP2), Windows Unified Storage Solution 2003, WIndows Server 2008 • Linux Stable Kernel Version 2.6, RHEL 4, RHEL 5, SLES 9, SLES 10 • FreeBSD 7.0 • UEFI 1.1 • VMware ESX 3.x

Compliance

Compliant Standards RoHS
Certifications FCC B, UL, CE, VCCI, BSMI, CTICK, MIC

Environmental

Operating Temperature 0 to 55 °C
Operating Humidity non-condensing relative humidity 90 %

Physical

Form Factor Server Adapter Card
Status Indicators LINK (solid) and ACTIVITY (blinking)
Width 6.81 cm
Height 16.74 cm

Key Features

Interface Type NVMe PCIe
Price (Bundles) 148.3
Interface Type PCI Express

Item Details

Manufacturer Intel
Manufacturer Code E1G42ET
EAN 0735858203135
Condition New

Do you have you a question about the Intel Gigabit ET Dual Port Server Adaptor for Multi-Core Processors?

PDF Datasheets and Manuals

Document File type File size
Intel Gigabit ET Quad Port Server Adaptor pdf 0.98MB