Main Features

• Intuitive LCD interface: Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
• Predictive replace battery date: Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
• Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
• Energy meter: Provides actual kilowatt hours of usage for energy conscious users.
• Outlet group control: Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPS's with switched outlet groups).
• Sequenced shutdown and restart: Configure select outlet groups to shut down and turn on in a pre-determined order (for UPS's with switched outlet groups).
• Audible alarms: Provide notification of changing flywheel conditions
• InfraStruXure Central compatible: Enables centralized management via APC InfraStruXure Central.
• Pure sine wave output on battery: Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
• Single switched outlet group: Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
• Wide input voltage range: Designed for harsh electrical environments to save battery life.
• Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance
• High online efficiency: Reduces utility costs, generates less heat.
• LED Indicators: Provide easy-to-read status of your utility power conditions, UPS and battery.
• Cold-start capable: Provides temporary battery power when the utility power is out.
• Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
• Disconnected battery notification: Warns when a battery is not available to provide backup power
• Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
• Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.
• Adjustable voltage-transfer points: Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
• Adjustable voltage sensitivity: Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
• Audible alarms: Provides notification of changing utility power and UPS conditions.
• User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
• USB connectivity: Provides management of the UPS via a USB port (not available on all models).
• Serial Connectivity: Provides management of the UPS via a serial port.
• Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.
• Boost and Trim Automatic Voltage Regulation (AVR): Gives higher application availability by correcting low and high voltage conditions without using the battery.
• Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
• Network manageable: Provides remote management of the UPS over the network.
• Adjustable voltage sensitivity: Provides the ability to adapt the Power Conditioner for optimal performance in specific power environments or generator applications.
• Predictive failure notification: Provides early-warning fault analysis ensuring proactive component replacement.