It's a good board and I'd buy it again, but the PCI-E GPU disconnect switch broke off THE FIRST TIME I used it. Just snapped right in half and doesn't secure the GPU in anymore. It is still adequately secure but it might not be if I ever move/tilt it. I also got this board as it's got WiFi 6E. I previously used a PCI-E card to connect to a 5Ghz WiFi network but the signal this board gets is just as good, no need to spend 60 on a separate card.
A BIOS default "problem". The power limits set for my i7 12700k was up at 250W (125W TDP CPU, and I use a 200W Dark Rock 4 cooler), so no surprise, during a stress test CPU temps went above 100C. Lowered short duration power limit to 200W and long duration PL to 125W, temps are good now.
I also added 1mm nylon spacers under the ILM screws as advised by Igors lab. CPU runs cooler now and there is no chance of CPU bending now. Easy fix.