Oooh Shiny! The smaller brother to the In-Win 904 I reviewed a short while ago now has a smaller brother in the In-Win 901, a Mini-ITX version of the glass cased PC Chassis. As reviewed the larger case certainly looks the part and the 901 follows extremely closely to the styling choices of the 904, including the tinted glass sidepanels and aluminium casing.

As the release below states, it will certainly make for an interesting case to house a Steam Machine, and will no doubt make for a very stylish Mini-ITX gaming enclosure.

Press Release :-

Precision Craftsmanship with No Compromise


Approaching the growing mini-ITX market with a new, premium design, the 901 features a stunning, minimalist exterior made from a single piece of 4mm curved, hairline brushed aluminum with tinted, tempered glass panel sides. In essence, the In Win 901 is a no compromise design made with precision craftsmanship.
 


Ideal For Steam Box Gaming


Internally, its wholly unique design uses space innovatively, including 20mm of side-space for cable management, a hidden slim-line optical drive-bay, magnetic aluminum fan filters and a rear cover that discretely hides cables protruding from the motherboards I/O panel and add-in cards. PC installation remains as easy as ever, with large thumbscrews, two EZ-Swap HDD modules, a removable 2.5” drive bay, rear or external-mounting for liquid cooling radiators and a motherboard tray cut-out for easy CPU cooler mounting.


 
Small Size with Full Hardware Support


Even though it accommodates the small mini-ITX form factor, there’s still support for high-powered hardware as internally the 901 can fit full-length (up to 30cm) graphics cards, large (up to 200mm) ATX power supplies and CPU heatsinks up to 130mm tall. Externally users can fit s 120mm liquid cooling radiators on the rear, in addition to the 90mm rear fan and 120mm bottom fans for internal cooling. Two front panel Super-Speed USB 3.0 connectors are included in addition to the 3.5mm headphone and microphone HD audio jacks.


 
New 550W, 750W 80Plus Gold Power Supplies Co-Launch


In Win is also announcing availability of its new 550W and 750W 80Plus Gold PSUs, ideally suited to match the 901 and 904 chassis respectively. With modular power connectors, three powerful 12V rails and one silent fluid dynamic bearing (FDB) 12cm cooling fan; both PSUs offer up to 0.99 active PFC with a full complement of protective standards including OCP, OVP, OPP, UVP and SCP. The flat, black modular cabling is an ideal match to the 901 and 904 chassis minimalist appeal.
 
For the North American market, the 901 will launch pre-bundled with 550W Gold PSU, followed by general world-wide availability for the PSUs in the coming months, adding to In Win’s growing range of high-quality power supplies.
 
In Win recommends the 550W and 750W 80Plus Gold PSUs be used for its 901 and 904 chassis respectively due to their ideal sizes and matching component aesthetics, but neither chassis are limited to using these PSUs.

For more information about the new 904 or upcoming 901 series, please visit In Win at: http://www.inwin-style.com/

Enjoyed this article? share it!