Aerocool Introduces The XPredator X3
For those who have dreamed of owning an XPredator case but never end up getting one due to its sheer chassis size, now here is the good news: Aerocool has introduced the new XPredator X3.
Dimensions of the Different Cases (H x W x D)
The original XPredators - 600mm x 234mm x 555mm
The XPredator X3 - 527mm x 223mm x 533mm
The XPredator X1 - 482mm x 190mm x 475mm
The XPredator X3 is a high-midi case and comes in three colors which are Evil Black Edition, Devil Red Edition and White Edition. Although it is smaller in size compared to the original XPredator, this chassis is still wide enough to accommodate a 20cm LED fan at the front panel. On the top panel, just like its predecessor, two fan controller knobs each can support up to 25W, far more advanced than the original one of only 10W per channel. Inside the chassis, you can mount up to 8 HDDs and there are 8 expansion slots plus a 310mm depth for high-end graphic cards installation.
Both X1 and X3 are designed to look "within the family" - the scale-like ventilation on the top panel can be opened and closed for better air flow regulation - its distinct feature that can be seen in all XPredators.
Solidly constructed chassis interior (0.7mm SPCC)
Supports CPU cooler max. height up to 186mm(without fans on side panel)
Supports Long VGA Cards up to 310mm.
Includes 1 x 12cm Black fan at rear and 1 x 20cm LED fan in front.
Top panel flaps can be opened or closed to control air flow more efficiently. Dust filter for PSU .
Includes 1 x external 2.5" HDD docking on top panel for easy access.
Includes two fan controller knobs each controls fan/s up to 25W.
Install up to 9 fans!
Includes antivibration pads for HDDs and PSU.
Cable Routing Management holes with high-end rubber grommets to protect your cables.
USB3.0 >USB2.0 adaptor included.
Pre-drilled CPU holes for easy mounting and removable of CPU cooler.
Support water cooling.
2 x USB3.0 and Audio/Mic ports are easily accessible from top panel.
Form Factor: Midi Tower
Motherboard Support: ATX, Micro ATX, Mini ITX
PSU Support: Standard ATX
Gaming Case: Yes
Water Cooling Ready: Yes
Dimensions: 223mm x 527mm x 533mm (W x H x D)
Packaging Dimensions: 270mm x 589mm x 560mm (W x H x D)
Body Material: 0.7/0.6 SECC
Front Bezel Material: Plastic
Side Panel: Window / Vented
External Bays: 3 x 5.25” External
1 x 3.5” External
Internal Bays: 8 x 3.5” Internal
8 x 2.5” Internal
Drive Bay Notes:
Expansion Slots: 8 x Full Size
Cooling Front: 1 x 20cm Red LED fan included
Cooling Top: 1 x 20 or 2 x 12 or 2 x 14cm fans (Optional)
Cooling Rear: 1 x 12 or 14 cm fan (1 x 14cm Black fan included)
Cooling Side: 2 x 12 or 2 x 14 cm fans (Optional)
Cooling Bottom: 1 x 12 or 14cm fan (Optional)
IO Ports: 2 x USB 3.0
2 x USB 2.0
1 x HD Audio
1 x Microphone
Front Bezel Colour: Black/Red Mesh
Body Colour: Black
System Cabinet Features: Includes 2 x Fan Controller knobs each support up to 25W
Removable and washable PSU dust filter
PSU Included: No
Net Weight (KGs): 8.66 KGs