Super quality but didn't have a reset button.

This is the best built case I have ever worked on, very strong with no rattles 2 external bays and a built in card ready. Very quiet too. Also has two separate fan controllers with off, half and full power options. No glass side but grid, mesh and covered options for the top section which stay in place by magnets.

Well made, super quiet, great quality

Quality case with everything I was after, front removable filter, front door, front side air intakes, top air extraction, sound proofed side panels, loads of 2.5" bays, dual speed twin fan case controllers and quality finish. Excellent product.

a surprisingly good case with a hefty feel with its sound deadening , it has a good amount of room inside and the main standoffs preinstalled , cable management was good and effective with cable tie points being in locations that make sense , a bit of a low roofline so it doesnt really make sense to hang a 240 rad or an AIO cooler up there but the front can handle that and if you look at this case it is not about the show and glow of RGB with the solid sound deadened side panels ... for that look elsewhere like phanteks but as a cheap quiet case that can hold a ryzen rig quietly while you play next to it then it is a good one

Whilst it is larger than I expected (I should have checked the exact measurements!) it is not too large for my space, like my previous one. The cable area is large enough for good cable management. The Build quality is excellent and it looks nice. It is matte black with a black side panel (not transparent). The door on the front, covers the front fans, grille and external drives and it shuts quite silently. The internal layout is spacious and would lend itself to a much more powerful set up than my own, built for work not play! Plenty spaces for fans, front back and top to ensure good air flow through the PC. Whilst the Case itself is reasonably heavy to move it is also noise insulated. I know the PC is on but that is all. The front connections all have covers included to keep dust out while not in use as these are on the top rather than the front. The case is supplied with many different screws and fixtures. It has more than enough space for drives 5 x 2.5", 2 x 3.5" plus 2 external ones The pictures are a little off dimension wise. total height is 47cms (19") width 23cms (9")

I am thrilled to find at least one case which is not made just to become RGB monstrosity but which aims at being quiet and elegant.

This is a very good case that stops just short of being perfect to me, and isn't budget but isn't high end. It requires slightly more tools to assemble than you'd ideally want and the instructions are a little lacking (you're unsure which screws to use where) but the build quality is generally excellent and it made for a very quiet build. I would happily recommend it and use it again.

Positives: +Great cable management +PSU basement and hidden HDD bays +Re-attachable expansion slot covers +Looks and feels much more expensive than it is Negatives -When I was setting it up, the piece of metal with the I/O opening (for the shield) was "twisted" and misaligned - I had to remove the rear fan and dislodge it, and it now works fine, however.

Surprisingly good quality, really spacious and quiet case.

Fantastic case for the price. Plenty of space for good cable management and virtually silent due to the sound insulation.