1GB CCL Choice 400MHz DDR Memory Stick
Original Branded MemoryHigh quality RAM chosen by the experts at CCL400MHzCAS 31GB (1 x 1GB Stick)
Current Price: Was £11.27 - Save £5.09Now only £6.18 inc VAT
Was £11.27 - Save £5.09
Now only £6.18 inc VAT
Price As Reviewed:
Manufacturer: CCL Choice
Posted on Monday 12th May 2014 at 20:28
Hi, will this RAM work in place of DDR PC-2700 (512Mb x 2), thank you AR
Posted on Tuesday 25th February 2014 at 11:49
Hi - I have a Compaq Presario SR1639UK with 4 x 512MB memory sticks. Would 4 x 1GB CCL Choice memory be a suitable/compatible upgrade?
Posted on Wednesday 29th January 2014 at 11:53
Hi-I have a Asustek K8V-MX socket 754 Motherboard. Currently installed memory is 1gb PC3200 (200 MHz) @ 2.500 V. I am wishing to upgrade to max 2gb. Would this memory be compatible.Kind Regards
Posted on Sunday 8th September 2013 at 11:49
Will this ram be compatible with the Abit AV8 motherboard (Which uses the VIA K8T800 Pro chipset).
If not, could you possibly suggest some sort of suitable upgrade. Many thanks
CCL Customer Service
Posted on Monday 9th September 2013 at 10:40
It theoretically should, however 333MHz memory is recommended over 400Mhz. RAM2149 might be a better bet for compatibility, however is quite a bit more expensive. -Danlevan
Posted on Friday 6th September 2013 at 12:56
Is this RAM 2.5V?
Posted on Friday 6th September 2013 at 13:57
This memory runs at 1.5v. -* RH
Posted on Wednesday 21st August 2013 at 23:58
Will this RAM work on my Asus K8V-VM Motherboard, I have 2x512MB RAM installed & want to upgrade to 2x1GB RAM sticks (which is the maximum allowed), if not suitable, what is the cheapest RAM you do that is suitable?
Posted on Thursday 22nd August 2013 at 09:44
According to your motherboard's specifications this RAM would be fully compatibile. -MR
Posted on Wednesday 10th April 2013 at 12:15
is this ram suitable for up grading a Dell Dimension 4600 to 4gb using 4 units or could you recomend an alternative many thanks.
Posted on Wednesday 10th April 2013 at 12:55
Your system comes up as taking 333Mhz memory, so RAM2149 would be better. -Danlevan
Posted on Tuesday 15th January 2013 at 17:32
Is this ram no ECC ? and will it do a Dell dimension 3000?
Posted on Tuesday 15th January 2013 at 17:43
This RAM is non-ECC, and is supported by the Dell Dimension 3000 series computers. Note that the Dell Dimension series works better with RAM in pairs, so you would need two sticks to get the best performance. -MR
Posted on Sunday 10th June 2012 at 22:53
DO YOU SELL THIS IN A SINGLE SIDED VERSION ( 8 CHIPS )
Posted on Tuesday 12th June 2012 at 15:28
This RAM is no longer available, however the Corsair Value (RAM7007) should do the job. -Danlevan
Posted on Tuesday 29th November 2011 at 10:45
so how many pins does this have?
Posted on Tuesday 29th November 2011 at 12:32
Posted on Monday 24th October 2011 at 11:43
I currently have 512Mb DDR400 PC3200 CL3 2.5Volt module.
Will this be a suitable upgrade/ addition
Posted on Monday 24th October 2011 at 15:41
This completely depends on usage however it will add a significant speed increase.
Posted on Sunday 23rd October 2011 at 15:27
is this packaged/pinned as per ddr pc3200 cl3 ram? used on a foxconn M/B k7s741mg
Posted on Monday 24th October 2011 at 09:38
This ram is pc3200 compatible with that board.
CCL Computers Ltd
Off Cross Lane
Copyright © 2015 CCL Computers